Norman's HVAC Team

A Straight Answer Before Any Work Starts

When the air conditioner stops cooling, the furnace will not light, or the power keeps going out, the last thing you need is a technician who talks around the problem and hands you a bill you did not agree to.

Acme Heating and Air has served Norman-area homes since 1919. Every visit starts with a written estimate you sign before any work begins, and we never sell a homeowner work the house does not need.

Call Acme or schedule online to get a technician out.

(405) 555-0118

Common HVAC Problems

When Something Feels Off

Oklahoma homes take a beating from heat, cold, and spring storms. The problems below are the ones Norman homeowners call about most often. If any of them sound familiar, a technician can tell you what is causing it and what it will take to fix it.
  • Storm Season Damage Spring surges knock out panels and backup generators.
    Read MoreShow Less
    Voltage surges can damage circuit breakers and leave backup generators unable to start. If your panel tripped after a storm or your generator cranked but would not run, those are the two most common storm-season failures in this area.
  • No Cooling Your system runs but the house stays warm.
    Read MoreShow Less
    When your air conditioner runs but blows warm air, the cause is usually a refrigerant leak, a failing compressor, or a dirty condenser coil. Left alone, any of these can lead to complete cooling failure before the summer is over.
  • No Heat Your furnace runs but the air coming out is cold.
    Read MoreShow Less
    Cold air from a running furnace usually points to a failed heating element, an ignition failure, or a control board fault. On a cold night, that distinction matters: some of these are quick repairs; others mean the system cannot safely run until it is fixed.
A Straight Answer Before Work Starts

About Acme

A Straight Answer Before Work Starts

The way a visit works at Acme has not changed much since Walter Acme opened a two-man shop on Main Street in Norman in 1919, wiring farmhouses that were getting electricity for the first time.

Every technician arrives in a uniform, drives a wrapped truck, and carries a photo ID so you know exactly who is at the door. Every electrician on a job is on the Acme payroll and holds an Oklahoma electrical license, not a subcontractor brought in for the day.

  • Technicians in uniform with photo ID
  • Oklahoma-licensed electricians on every job
  • Written estimate signed before work begins
  • Most repairs scheduled for the next business day

How We Work

How Every Acme Visit Is Conducted

A big repair or a new system is a real decision, and an expensive one. The values below describe how Acme conducts itself on every job, not just the straightforward ones.
  • No Pressure We never rush a homeowner through a repair decision.
    Read MoreShow Less
    We know this is a real decision and it is expensive. A technician walks you through what they found, explains the options, and waits for you to decide. There is no upsell and no manufactured urgency.
  • Upfront Pricing Every job starts with a written estimate before any work begins.
    Read MoreShow Less
    The estimate is signed by the homeowner on the tablet before the technician opens a panel or touches any equipment. The price you approve is the price you pay.
  • Our Electricians Our electricians are employees, not subcontractors.
    Read MoreShow Less
    You are not getting a crew assembled for the day; you are getting people who work here.
  • Certified Work Work is performed to a certified standard on every visit.
    Read MoreShow Less
    Acme holds Certification 1000100001. That credential applies to the work performed in your home, not just to the business on paper.

Brands We Service

Equipment We Know and Service

Acme services and installs equipment from the manufacturers below. Call and ask if you want to know whether we work on a specific unit; we will tell you straight. The full list is also on our brands we service page.
  • Trane
  • Mitsubishi Electric
  • York
  • Lennox

What You Receive

No Surprise Charge Just to Diagnose

Every visit comes with clear terms on what you pay and what happens if something goes wrong after the work is done. The items below apply to every job Acme takes on. Financing is also available on larger projects, see the financing page for details.
  • Diagnostic Fee The diagnostic visit has a set fee, credited toward the repair.
    Read MoreShow Less
    The diagnostic visit has a set fee, and it is credited toward the repair when you go ahead with the work. You are not paying twice: once to find out what is wrong and again to fix it.
  • Callback Policy Same problem comes back? We return at no charge.
    Read MoreShow Less
    If the same problem comes back within the labor warranty period, we return at no charge. The warranty runs from the day the work is finished, and it covers the labor on that specific repair.
  • Parts Warranty Parts carry the manufacturer's warranty, and we handle the claim.
    Read MoreShow Less
    Parts carry the manufacturer's warranty, and we handle the claim for you. If a part fails under warranty, you do not have to navigate the manufacturer's process on your own.

Schedule Service

Ready to Schedule a Visit?

Most repairs are scheduled for the next business day. Call Acme or use the online form to get on the schedule.

HVAC Services

Services for Your Home

Find the service that matches what you need below, or call and describe what is happening. An Acme technician can point you in the right direction.
  • Air Conditioning Air Conditioning Repair or replace a system that is not cooling your home.

    Air Conditioning

    Air conditioning services cover diagnosis and repair of refrigerant leaks, compressor faults, condenser and evaporator coil issues, and capacitor or contactor failures, as well as full system replacement when repair is no longer the right call for your home.
  • Heating Heating Get your furnace or heating system working again.

    Heating

    Heating services include diagnosis and repair of failed heating elements, ignition systems, control boards, and heat exchangers, as well as furnace replacement for systems that have reached the end of their service life in your home.
  • Heat Pumps Heat Pumps One system handles both heating and cooling year-round.

    Heat Pumps

    Heat pump services cover repair and replacement of reversing valves, compressors, refrigerant lines, and defrost controls, as well as new installations if you are moving away from separate heating and cooling equipment.
  • Ductless Mini-Splits Ductless Mini-Splits Condition rooms your central system cannot reach.

    Ductless Mini-Splits

    Ductless mini-split services include installation of wall-mounted indoor units and outdoor compressors, refrigerant line sets, and electrical connections, as well as repair of existing systems with drainage, refrigerant, or control issues in your home.
  • Indoor Air Indoor Air Reduce dust, odors, and airborne particles in your home.

    Indoor Air

    Indoor air services include whole-home air filtration, UV treatment for mold and bacteria in the ductwork, humidity control, and ventilation improvements that work with your existing HVAC system.
  • Ductwork Ductwork Fix leaks and airflow problems that reduce system efficiency.

    Ductwork

    Ductwork services cover inspection, sealing, and repair of leaking or disconnected duct sections, as well as redesign of duct layouts that are causing uneven temperatures or high utility costs in your home.

Financing

Pay Over Time on Larger Jobs

Financing is available on larger projects through a third-party lender, subject to credit approval. If the cost of a new system or a major repair is a concern, ask about financing options when you schedule your visit with Acme, or visit the financing page to see how it works before you call.

Customer Reviews

What Norman Homeowners Have Found

The reviews below come from homeowners in Norman and the surrounding area who have had Acme out for repairs, installations, and maintenance. Read what they say about the visit, the technician, and the work on our reviews page.

Areas We Serve

Serving Norman and the Surrounding Towns

Acme is based in Norman and serves homes throughout the area. If your address is in Guthrie, Choctaw, Goldsby, or Blanchard, you are in our service area. See the full list of towns on the areas we serve page, or call and give us your address; we will tell you right away whether we can get to you.
Acme Heating and Air 1400 W Main St Norman, OK 73069 (405) 555-0118 Open 7 days, 7am to 9pm

Common Questions

Frequently Asked Questions

The questions below are ones homeowners in this area ask before they call. If something here does not answer what you need to know, call Acme and ask directly.
What services does Acme handle?
Acme handles air conditioning, heating, heat pumps, ductless mini-splits, indoor air filtration and ventilation, and ductwork services, along with maintenance plans and emergency HVAC repair. The full list of services is on the site, and if you are not sure which one fits your situation, a technician can help you figure that out before any work is scheduled.
Should I repair or replace my HVAC system?
Repair makes sense for a dirty coil or filter, a worn capacitor or contactor, a faulty sensor, or a loose electrical connection. Replacement becomes the better call when the heat exchanger is cracked, the compressor has failed, there is a refrigerant leak that cannot be sealed, or the system has needed repeated repairs. A technician can assess the age and condition of your equipment and walk you through both options before you decide.
Why does my AC blow warm air?
When an air conditioner runs but blows warm air, the most common causes are a refrigerant leak, a failing compressor, or a dirty condenser coil.A refrigerant leak means the system cannot transfer heat out of your home. A failing compressor means the refrigerant is not circulating. A dirty condenser coil means heat cannot be released outside, and any of these can lead to complete cooling failure if left unrepaired.
What towns does Acme serve?
Acme serves Norman, Guthrie, Choctaw, Goldsby, and Blanchard. If you are not sure whether your address falls within the service area, call and give us your location. The full list of confirmed service areas is also on the site.
Does Acme pull permits for electrical work?
Yes. The city permit is pulled and the inspection is scheduled for panel upgrades, new circuits, and generator installs. That work is inspected by the city and documented properly, which matters when you sell the home or make an insurance claim.You do not have to manage the permit process yourself.

Get on the Schedule

Call Acme to Schedule Service

You get a two-hour arrival window, and the technician texts when they are on the way. Technicians wear shoe covers, lay drop cloths, and haul away old parts before they leave.

A local team member answers after hours. Call now or schedule online to get on the Acme schedule.